|
|||||||
|
||
 |
|
|
Ðiều Chỉnh | Xếp Bài |
|
|||||||
|
||
|
|
|
Ðiều Chỉnh | Xếp Bài |
|
#1
15-07-2009, 08:02 PM
|
||||
|
||||
All Nokia code
Nokia All Codes
Scroll Down to view Specific Model Numbers!!!! *** WARNING: Using secret codes may be harmful to your phone and result in disabling or worse. Use these codes at your own discretion, we accept no responsiblility for blocked pones while using these codes!!! IMEI Number *#06# Cells Identity Code (IMEI = International Mobile Equipment Identity) XXXXXX XX XXXXXX X TAC FAC SNR SP TAC = Type Approval Code (first 2 digits = country code of the approvalcountry ) FAC = Final Assembly Code: (01,02 = AEG) (10,20 Nokia) (40,41,44 Siemens) (30 Ericsson) (50 Bosch) (51 Sony,Siemens,Ericsson) (60 Alcatel) (65 AEG) (70 Sagem) (75 Dancall) (80 Philips) (85 Panasonic) SNR = Serial Nr. SP = Spare (always "0") Software Version *#0000# shows the software version Signal Processing *3370# - Enchanced full Rate Codec (EFR) activation. It will automatically restart. #3370# - Enchanced full Rate Codec (EFR) deactivation *4720# - Half Rate Codec activation. It will automatically restart. #4720# - Half Rate Codec deactivation Enchanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced with about 5% Sim Clock Stopping *#746025625# [*#sim0clock#] Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn't work with software version 4.59. It will tell you if it can be stopped or not. Warrenty Menu *#92702689# takes you to a secret menu with 6 choices: [*#war0anty#] 1. Displays Serial Number. 2. Displays the Month and Year of Manufacture (0997). 3. Displays (if there) the date where the phone was purchased (MMYY). 4. Displays the date of the last repairment - if found (0000). 5. Makes you capable of transferring user data if you have the gear for it. 6. Shows how long the phone has been used to talk. This counter is not reset by when you "clear timers" like the counters in the call register. Bypass the SP lock With a Nokia 16xx/21xx/31xx/51xx/81xx 1. Insert SIM card of different provider. 2. Turn on the phone and press the UP VOLUME key for 3 sec. Then release it and the phone says PIN CODE? 3. Press the "C" key. 4. Then Press * and wait until it disappears and appears again, then press * one more time and 04*PIN*PIN*PIN# Nokia Speed Trap Detector Urban Legend spread by Nokia Engineers ;^) The settings for radar speed traps detector. Your Nokia cell phone can be programmed to pick up radar speed traps, when programmed your cell phone picks up the radar and alerts you on the message alert tone. ( Doesn't work with Nokia 7110! ) 1. Enter your menu 2. Select settings 3. Select security settings 4. Select closed user group 5. Select on 6. Enter 00000 7. Press ok 8. Clear back to normal, within a few seconds your phone will display a radar sign with five zero's next to it. It is now activated. Unfortunately only Nokia phones have this function. The Cell Phone info display needs to be de-activated. Settings -> Phone Settings -> Cell Info display. Each time you turn off your phone, or even each time you loose contact with your carrier, you'll have to activate it again... It is done using steps 1 through 5 above, but the number (00000) will be already on the field as a default. The James Bond Trick If you short-circuit the left middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs! The profile "Headset" will be activated. Before you do this just activate the "Automatic Answer" in the headset profile and set the ringing volume to "Mute". Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying! Network Monitor There is a hidden menu inside your Nokia phone. If you want to activate it, you'll have to re-program some chips inside of your phone. Check your software version. You can only continue if you have v4.33, v4.73 or v5.24. Take apart the phone. De-solder the EEPROM (ATMEL AT 24C64) Read out the data with an EEPROM programmer and save it to a file (Backup) If you have v.33 or v4.73, change the address "03B8" from "00" to "FF" If you have v5.24 then change the address "0378" from "00" to "FF" Write the new data to the EEPROM and solder it back to the phone Power on your phone and you should have "Netmonitor" enabled. The Network Monitor gives you the following information: Carrier number, MS RX Level in DBM, Received signal quality, MS TX power level, C1 (Path loss criterion, used for cell selection and reselection). The range is -99 to 99, RTL (Radio link timeout), Timeslot, Indication of the transmitter status, Information on the Network parameters, TMSI (Temporary Mobile Subscriber Identity), Cell identification (Cell ID, Number of cells being used), MCC (Mobile country code), MCN (Mobile network code), LAC (Location area code), Ciphering (On/Off), Hopping (On/Off), DTX (On/Off), Discard cell barred information. Game Hacking with Blizzard Get the file called the 'BlizzardN-GAGE.SIS' from IRC get in #mediaplace on Efnet (note: Downloading cracked/Hacked games is illegal unless you already own a copy of game) The Blizzard Nokia N-Gage Installer. 1. Unpack Blizzard.sis file that you get from mIRC 2. Transfer the .sis file to your N-Gage 3. Get the .blz (N-gage ROM) from mIRC 4. copy the file to the root dir of your MMC (16MB MMC)Multimedia Card 5. Use the Blizzard application to unpack the .blz file 6. After unpacking the sonic icon should appeared in the MENU 7. Clicked sonic icon and it should work ! List of compatible games for the 3650,6600 and the N-gage that work: [3650] SonicN (v.2.5+) Puyo Pop (v.2.5+) [6600] SonicN Puyo Pop Pandemonium Tomb Raider Super Monkey Ball Tony Hawks Pro Skater [N-Gage] SonicN Puyo Pop Pandemonium Tomb Raider Super Monkey Ball Tony Hawks Pro Skater GSM Network Services Command Strings When various network functions are selected via the cellphone's menu using the keypad, the cellphone automatically generates the corresponding GSM network command string and transmits it to the network. These commands can however be manually entered via the keypad. Each command is prefixed with either one or two * or # characters as follows: ** Register and Activate * Activate ## De-Register (and Deactivate) # Deactivate *# Check Status © Call button Once each command has been entered, if it is a network command (as opposed to a local handset command) it must be transmitted to the network by pressing the YES (receiver) key which acts as an enter key - this is represented here with the © character. Always enter numbers in full international format +CountryAreaNumber ( e.g. +447712345678). Command Description Command String Security Change call barring code **03*OldCode*NewCode*NewCode#© Change call barring code **03*330*OldCode*NewCode*NewCode#© Change PIN code **04*OldPIN*NewPIN*NewPIN#© Change PIN2 code **042*OldPIN2*NewPIN2*NewPIN2#© Unlock PIN code (when PIN is entered wrong 3 times) **05*PUK*NewPIN*NewPIN#© Unlock PIN2 code (when PIN2 is entered wrong 3 times) **052*PUK2*NewPIN2*NewPIN2#© Display IMEI *#06# Call Forwarding (Diversions) De-register all call diversions ##002#© Set all configured call diversions to number and activate **004*number#© De-register all configured call diversions (no answer, not reachable, busy) ##004#© Unconditionally divert all calls to number and activate **21*number#© Activate unconditionally divert all calls *21#© De-register unconditionally divert all calls ##21#© Deactivate unconditionally divert all calls #21#© Check status of unconditionally divert all calls *#21#© Divert on no answer to number and activate **61*number#© Activate divert on no answer *61#© De-register divert on no answer ##61#© Deactivate divert on no answer #61#© Check status of divert on no answer *#61#© Divert on not reachable to number and activate **62*number#© Activate divert on not reachable *62#© De-register divert on not reachable ##62#© Deactivate divert on not reachable #62#© Check status of divert on not reachable *#62#© Divert on busy to number and activate /td> **67*number#©< Activate divert on busy *67#© De-register divert on busy ##67#© Deactivate divert on busy #67#© Check status of divert on busy *#67#© Change number of seconds of ringing for the given service before diverting a call (such as on no answer). Seconds must be a value from 5 to 30. De-registering the same divert will also delete this change! **service*number**seconds#© (Service numbers, see below) Call barring Activate barr all outgoing calls (see Security to set code) **33*code#© Deactivate barr all outgoing calls #33*code#© Check status of barr all outgoing calls *#33#© Activate barr all calls **330*code#© Deactivate barr all calls #330*code#© Check status of barr all calls /td> *#330*code#©< Activate barr all outgoing international calls **331*code#© Deactivate barr all outgoing international calls #331*code#© Check status of barr all outgoing international calls *#331#© Activate barr all outgoing international calls except to home country **332*code#© Deactivate barr all outgoing international calls except to home country #332*code#© Check status of barr all outgoing international calls except to home country *#332#© Activate barr all outgoing calls **333*code#© Deactivate barr all outgoing calls #333*code#© Check status of barr all outgoing calls *#333#© Activate barr all incoming calls **35*code#© Deactivate barr all incoming calls #35*code#© Check status of barr all incoming calls *#35#© Activate barr all incoming calls when roaming **351*code#© Deactivate barr all incoming calls when roaming #351*code#© Check status of barr all incoming calls when roaming *#351#© Activate barr all incoming calls **353*code#© Deactivate barr all incoming calls #353*code#© Check status of barr all incoming calls *#353#© Call waiting Activate call waiting *43*#© Deactivate call waiting #43##© Check status of call waiting *#43#© Calling Line Identification The following only works if CLIP and CLIR are enabled (ask your service provider) CLIP: Presentation of the number of the incoming call Activate CLIP **30#© Deactivate CLIP ##30#© Check status of CLIP *#30#© CLIR: Presentation of one's own number to the to the called party Activate CLIR **31#© Activate CLIR for the actual call *31#number© Deactivate CLIR ##31#© Deactivate CLIR for the actual call #31#number© Check status of CLIR *#31#© COLP: Presentation of the actual number reached (if number called was diverted to another number Activate COLP *76#© Deactivate COLP #76#© Check status of COLP *#76#© COLR: Presentation of the original number called by the calling party (if the call was diverted to this cellphone) Activate COLR *77#© Deactivate COLR #77#© Check status of COLR *#77#© Cellphone Services 10 All types of cellphone services 11 Speech service 12 Data service 13 Fax 14 Datex-J 15 Teletex 16 Short message service (SMS) 18 All data services without SMS 19 All cellphone services without SMS Carrier Services 20 All services 21 All asynchronous services 22 All synchronous services 23 3.1kHz services 24 Synchronous point-to-point connections including PAD's (all synchronous data services) 25 Asynchronous point-to-point connections including PAD's (all asynchronous data services) 26 Data packet sending including PAD's (all synchronous data packet services) 27 Services with PAD-share 29 Digital connection with 12kbps GSM Network Service Codes Note that at present only the following service codes are in use: 11 Speech 13 fax 25 data Cell Broadcast While Short Message Service (SMS) can be configured as a personal service, Cell Broadcast is a general service which is designed for subscribers of a specific cell or topic. For example, a subscriber to cell 050 in England will receive information on the GSM tower currently being used by their phone. This new concept brings a whole new meaning to the term mobile communications as the phone is now able to receive information such as share prices or weather updates without the need of data cards and computers. At present the following message types exist (note: this may vary from carrier to carrier and some carriers may charge for this service): Code Title 000 Index 010 Flashes 020 Hospitals 022 Doctors 024 Pharmacy 030 Long Distant Road Reports 032 Local Road Reports 034 Taxis 040 Weather 050 District 052 Network Information 054 Operator Services 056 Directory Inquiries (national) 057 Directory Inquiries (international) 058 Customer Care (national) 059 Customer Care (international) In the future one will be able to control each individual call by use of the following service codes. To do this the user has to insert the service code in front of the last # in the MMI command above. Or More Secret Codes for some Nokia models Nokia 9000/9000i To view IMEI number *#06# To view Software Version enter *#8110# Latest Version is under Phone Info. To view Week and Year of manufacture enter *#3283# Nokia 9110 *#06# for checking the IMEI (International Mobile Equipment Identity) *#0000# shows the SW version. Latest software version: v5.02 (26-08-99)RAE-2 Nokia 7110 *#06# for checking the IMEI (International Mobile Equipment Identity) *#0000# To view Software Version. *#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart. *#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart. *#4720# - Half Rate Codec activation. It will automatically restart *#4720* - Half Rate Codec deactivation. It will automatically restart *#746025625# - Sim clock allowed status. *#92702689# [*#war0anty#] - takes you to a secret menu with 6 choices: 1. Displays Serial Number. 2. Displays the Month and Year of Manufacture (0997) 3. Displays (if there) the date where the phone was purchased (MMYY) 4. Displays the date of the last repairment - if found (0000) 5. makes you capebel of transferring user data if you have the gear for it 6. shows how many hours the phone has been on Latest software version: 4.77 25-01-00 NSE-5 - EFR and half rate codes do not work with these version. V 4.76 13-01-00 NSE-5 V 4.75 07-01-00 NSE-5 V 4.73 15.11.99 NSE-5 Nokia 6190 *#06# for checking the IMEI (International Mobile Equipment Identity) *#6190# shows the SW version. *#92772689# (after removing the analog module) shows service menu. *3001#12345[OK] to enter test mode. *#639# to change NAM. Nokia 3810 To view IMEI number *#06# To view Software Version enter *#3810# Nokia 6120 / 6160 / 6162 (TDMA phones) *#92772689# for checking ISDN number. *3001#12345# for field test mode and nam selection and some other stuff... *#9999# shows the SW version Nokia 3210 Secret Codes Nokia 3210 *#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI: XXXXXX XX XXXXXX X TAC FAC SNR SP TAC = Type approval code FAC = Final assembly code SNR = Serial number SP = Spare *#0000# To view Software Version. #746025625# [*#sim0clock#] Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn't work with software version 4.59. *#92702689# [*#war0anty#] takes you to a secret menu with 6 choices: 1. Displays Serial Number. 2. Displays the Month and Year of Manufacture (0997) 3. Displays (if there) the date where the phone was purchased (MMYY) 4. Displays the date of the last repairment - if found (0000) 5. makes you capebel of transferring user data if you have the gear for it 6. shows how many hours the phone has been on Latest software version: V 5.02 NSE-8/9 *#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart. *#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart. *#4720# - Half Rate Codec activation. It will automatically restart *#4720* - Half Rate Codec deactivation. It will automatically restart Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (Algebraic Code Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced by about 5% when using the ERF option. Please register to awsurvey You can earn money also. Plse Help Me Thanxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxx. Follow following steps. 1. Make a account on pay-pal. ''https://www.paypal.com/row/mrb/pal=SW5F29JD3MSGN''its free, just press cancel when asked for card. 2.Go to the undersigned link and register yourself. its free. it pays you $6 as a joining bonus survey and then $4 for each survey conducted. its the best pay site i ever got. ” http://www.awsurveys.com/HomeMain.cfm?RefID=Rusty_v” As you complete with 100$ you will be able to purchase your own rapidshare account!!. its not tough. i purchased my own rapidshare account and now am using the extra money to do other online shopping. it is totally legal way to get the account. dont rely on shortcut, they dont work. i tried all of them. nothing comes free., better understand it fast. just follow the above step and get the reward. Enjoy ! ----- Bổ sung thêm ------ Đây là nội dung trong quyển all nokia code,có 12 trang post lên ace coi chơi Hơi nhiều tiếng Tây,ace tra giúp nhẩy thay đổi nội dung bởi: nguyentrunght, 15-07-2009 lúc 08:03 PM. Lý do: Bổ sung bài viết 
|
|
#2
15-07-2009, 08:10 PM
|
||||
|
||||
|
chi rứa pak ơi, nhìn hoa cả mắt
|
|
#4
16-07-2009, 09:31 AM
|
||||
|
||||
|
Trích:
Có ai biết unlock nokia khi đặt security code ko? (khóa màn hình ấy) hôm thằng bạn demo trên 1110 mà quên mất
|
|
#5
16-07-2009, 02:09 PM
|
||||
|
||||
|
đề nghị anh trung bựa sau
1 là : cho từng cấy vô thẻ qoute hoặc là cho vô thẻ code  2 là : đề nghị anh chỉnh sửa rồi đưa lên diện đàn  chứ bê nguyên có cả Trích:
ý em là , copy có chọn lọc nội dung và trình bày cho người đọc dệ hiểu , ở mình không phỉ ai cụng giỏi tiếng anh mô , hoặc anh nên viét rọ tiêu đề cái ni là cái chi ( dù hơi mất thời gian tí  )
|
|
#6
31-07-2009, 09:52 AM
|
||||
|
||||
|
Trích:
|
|
#7
31-07-2009, 10:43 AM
|
||||
|
||||
|
Trích:
|
|
#8
31-07-2009, 10:03 PM
|
||||
|
||||
|
hok đến 8s mô
N1600 cũng áp dụng đc 1200 có cách khác thằng bạn mở đc nhưng hok bít............ MÀ cho em hỏi tý có ai být mã ngăn chặn hok (của N1600)???????? thay đổi nội dung bởi: wth, 31-07-2009 lúc 10:10 PM.
|
|
#9
31-07-2009, 10:05 PM
|
||||
|
||||
|
pak ni viết chi đóa.
tiếng việt chưa bik lại đi viết tiếng mô mô 
|
|
#10
31-07-2009, 10:37 PM
|
||||
|
||||
|
Em ngu Anh lắm
huhuhuhu
|
|
#11
31-07-2009, 10:41 PM
|
||||
|
||||
|
đề nghị viết tiếng quê choa cho dễ đọc
chứ có đọc dc mô mồ
|
|
#12
01-08-2009, 08:08 AM
|
||||
|
||||
|
Trích:
tùy từng hãng máy, model máy mà có Box riềng, ví dụ như mọi chầu đời máy CT4 (7610,6600... trở về trước ) thì dùng N-Box, đến dừ thì dòng máy mới BB5 thì có dùng BB5-Box, hay J.A.F Box, thậm chí không cần dùng Box mà có thể chạy thẳng qua USB capble ( nhưng mà thỉnh thoảng có một vài con điên điên chạy bằng capble xong mất nguồn hoặc trắng màn hình,phảy táng lại bằng Box ) riêng các dòng máy SamSung thì có 3X-BOX, Sony Ericsson và Siemencó MT-Box, hay máy của bác Hồ Cẩm Đào thì lại có Box chuyên dụng riêng là MTK Box ----- Bổ sung thêm ------ Trích:
thay đổi nội dung bởi: dinhhaiyt, 01-08-2009 lúc 08:28 AM. Lý do: Bổ sung bài viết
|
|
#14
01-08-2009, 09:44 AM
|
||||
|
||||
|
Trích:
thay đổi nội dung bởi: dinhhaiyt, 01-08-2009 lúc 09:47 AM.
|
|
| Ðang đọc: 1 (0 thành viên và 1 khách) | |
|
|
![_[B]i_[R]ian_'s Avatar](customavatars/avatar2049_2.gif){kind=avatar}
Chế độ bình thường
